Description
Solitank 300l
- Solitank300 is used for both residential heating and domestic water applications.
- One heat exchanger in the solitank boiler. Domestic water is heated instantly from the heat exchanger. In the sleeves connected to the tank body, the water can be heated with a heater (heat pump, boiler) and used in the heating supply.
- The heat exchanger in the boiler is made of Chrome-Nickel 316L stainless steel.
- Since the domestic water is heated instantly, Legionella and other bacteria do not grow.
- Since solitank acts as a buffer tank, it protects your heat pump from the negative effects of short cycle. Short cycling not only leads to higher operating costs, but can also damage your heat pump, reducing its lifespan and overall energy efficiency performance.
- Perfectly compatible with heat pumps.
TECHNICAL SPECIFICATION
| Pipe Connection | Limits Of Use | ||||||
| HW1 | Hot Water Inlet | inch | G 1 1/4 “ | Max. Working Pressure | bar | 6 | |
| HW2 | Hot Water Outlet | inch | G 1 1/4 “ | Test Pressure | bar | 9 | |
| EE | Electrical Heater | inch | G 1 1/4 “ | Max. Permissible Temperature | °C | 95 | |
| CW1 | Cold Water Outlet | inch | G 1 1/4 “ | Domestic Water Exchanger (AISI 316L) | |||
| CW2 | Cold Water Inlet | inch | G 1 1/4 “ | Water Volume | L | 12 | |
| HW3 | Hot Water Outlet (Domestic Water) | inch | G 3/4″ | Surface Area | m² | 3,83 | |
| CW3 | Cold Water Inlet (Domestic Water) | inch | G 3/4″ | Max. Working Pressure | bar | 6 | |
| TS1 | Thermo Sensor | inch | G 1/2″ | Energy Effciency Class | |||
| TS2 | Thermo Sensor | inch | G 1/2″ | Class | C | ||
| AV | Air Ventilation | inch | G 1/2″ | Heat Loss S | W | 85 | |
| Weights | Tank Volume V | L | 245 | ||||
| Full Weight | kg | 339 | Standby energy consumption / 24 hours | kWh | 2,04 | ||
| Empty Weight | kg | 94 | Insulating Material | PU 50mm | |||
| Dimensions | |||||||
| Height | mm | 1725 | |||||
| Width | mm | 540 | |||||
MORE INFORMATIONS
- Solitank can store simultaneously in 2 different variants according to system requirements. Can be used as domestic hot water + buffer tank.
- Multiple heat sources can be integrated into the Solitank boiler.
- In order to minimize heat losses in Solitank, 200-500 liters of 50 mm thick, 40 kg/m³ density high-strength hard polyurethane insulation material is used. Sponge insulation with a density of 18 kg/m³ is used in 500,800 and 1000 lt. Please contact our sales specialists for different capacity
- When choosing a non-solar heat source, this is the most efficient model.
- Optionally can be operated with electric heater.
- Anode rod and maintenance free.
Reviews
There are no reviews yet.