Description
Solikombi 800l
- Solikombi800 can store simultaneously in 3 different versions according to system requirements. Solar energy + domestic hot water + buffer tank.
- The hot water stored in the tank is used both for heating support and for heating domestic water.
- There are 2 heat exchangers in the Solicombi boiler. Domestic water is heated instantly from the upper exchanger. The bottom heat exchanger is connected to solar energy and the inside of the tank is heated. In the sleeves connected to the tank body, optionally the water in the tank can be heated with an external heater (heat pump, boiler) and used in the heating supply.
- The 2 heat exchangers in the boiler are made of Chrome-Nickel 316L stainless steel.
- Since the domestic water is heated instantly, Legionella and other bacteria do not grow.
- Solikombi boilers can integrate more than one heat source.
- When choosing a solar heat source, this is the most efficacious model.
- Perfectly compatible with heat pumps.
TECHNICAL SPECIFICATION
| Pipe Connection | Limits Of Use | ||||||
| HW1 | Hot Water Outlet | inch | G 2″ | Max. Working Pressure | bar | 6 | |
| HW2 | Hot Water Inlet (Heat Pump) | inch | G 2″ | Test Pressure | bar | 9 | |
| EE | Electrical Heater | inch | G 2″ | Max. Permissible Temperature | °C | 95 | |
| CW1 | Cold Water Inlet | inch | G 2″ | Domestic Water Exchanger (AISI 316L) | |||
| CW2 | Cold Water Outlet (Heat Pump) | inch | G 2″ | Water Volume Of The Heat Exchanger | L | 22,5 | |
| HW3 | Hot Water Outlet (Domestic Water) | inch | G2″ | Domestic Water Heat Exchanger Surface Area | m² | 7,23 | |
| CW3 | Cold Water Inlet (Domestic Water) | inch | G 3/4″ | Max. Working Pressure | bar | 6 | |
| SHW1 | Hot Water Inlet (Collector) | inch | G 3/4″ | Solar Heating Support (AISI 316L) | |||
| SCW1 | Cold Water Outlet (Collector) | inch | G 3/4″ | Water Volume Of The Heat Exchanger | L | 6,6 | |
| TS1 | Thermo Sensor | inch | G 1/2″ | Heat Exchanger Surface Area | m² | 2,1 | |
| TS2 | Thermo Sensor | inch | G 1/2″ | Max. Working Pressure | bar | 6 | |
| TS3 | Thermo Sensor | inch | G 1/2″ | Energy Efficiency Class | |||
| AV | Air Ventilation | inch | G 1/2″ | Class | E | ||
| PG | Pump Group Connection | metric | M10 | Heat Loss S | W | 195 | |
| ET | Expansion Tank Connection | metric | M10 | Tank Volume V | L | 850 | |
| Weights | Standby energy consumption / 24 hours | kWh | 4,68 | ||||
| Full Weight | kg | 1025 | Insulating Material | Foam Rubber 80mm | |||
| Empty Weight | kg | 175 | |||||
| Dimensions | |||||||
| Height | mm | 1673 | |||||
| Width | mm | 1010 | |||||
MORE INFORMATIONS
- In order to minimize heat losses in Solikombi, 300-500 liters of 50 mm thick, 40 kg/m³ density high-strength hard polyurethane insulation material is used. Sponge insulation with a density of 18 kg/m³ is used in 500,800 and 1000 lt. Please contact our sales specialists for different capacity
- Optionally can be operated with electric heater.
- Anode rod and maintenance free.
Reviews
There are no reviews yet.