METZ Sensor inductive proximity switch

Two-wire sensor,The sensor consists of a cylindrical, nickel-plated metal body with M18 thread and 2 flat nuts. Opposite the front surface is the cable outlet. On the side is the yellow light emitting diode, which lights up in the damped state.,Suitable for DRIW-E16 part no. 110150xxxx,Features,The sensor contains as essential assemblies:,An oscillator (LC resonant circuit),Rectifier filtering,Tilt amplifier,Output stage,A high-frequency electromagnetic field is generated in the oscillator, which exits at the front face of the sensor. It forms a spatial area above the active surface, which is called the active switching zone. If an electrically conductive material enters the field, energy is extracted from the oscillator. This dampens the oscillations to such an extent that they stop completely or to a large extent. If the conductive material is removed from the active zone, the oscillator can again oscillate at full amplitude. These two states can now be evaluated electronically with the DRIW-E16.,18 mm diameter with mounting nuts. Lateral,arranged LED for visual control of the switching pulse.,Output contact as normally open contact DC for nominal voltages 5,- 60 V DC.,Switching distance: 8 mm,Mounting position: any,Dimensions: 18 x 40 mm,Weight: 10 g,Protection class: housing IP67,Wire cross section: 0.34 mm.