MENN Test Box Twinlet Universal

General data

MENNEKES Generation 3 test box for function testing of charging stations, wallboxes and charging cables Generation 2 charging cables must be used to connect the test box. Vehicle inlets of types 1 and 2 are installed in the test box. The charging cables are not included with the test box, but can be ordered separately. Shapely, robust plastic housing made of AMAPLAST in AMAXX design with sealable carrying handle, with external and internal fastening. Protection class IP 20 Dimensions 260 x 225 x 190 (HxWxD) Upper part electro-grey RAL 7035 Lower part black hinged on the side with double threaded cover screws Covering/fuse protection: 1 CEE socket 16A 3p 1 circuit breaker 10 1p+N B 1 vehicle charging plug type 1 20AMode 3 with hinged cover 1 vehicle charging plug type 2 32A Mode 3 with hinged cover Further installations: 3 rocker switches 1 three-phase measuring relay 1 BNC socket Resistor-diode combination The following tests can be carried out: 1. Switch (State A / B) 2. Simulation of non-gassing and
3. error message of the electric vehicle short-circuit between CP and PE (State E) 4. three-phase measuring relay with signal lamps for checking the phases, the clockwise rotating field and the external conductor voltages against the neutral conductor 5. testing of counters by connecting an AC load to the CEE socket 16A 3p 6. BNC socket for connecting an oscilloscope Can be used for checking the CP signal .

Article number :3199