MENN test box 320011

General data

MENNEKES test box Generation 2 for charging systems for function testing of charging stations A test cable Generation 2 (with charging plug and charging coupling) must be used to connect the test box. A test cable is not included with the test box, but can be ordered separately. Shapely, robust plastic housing made of AMAPLAST in AMAXX design with carrying handle sealable, with external and internal fastening Protection class IP 20 Dimensions 390 x 225 x 165 (HxWxD) Upper part electro-grey RAL 7035 Lower part black hinged on the side with double-threaded cover screws Equipment/fuse: Pos.1: 1 SCHUKO-socket Pos.2 1 CEE-socket 16A 5p 400V Pos.1+2: 1 LS-switch 16A 3p+N C 1 vehicle charging plug 32A Mode 3 with hinged cover Further installations: 3 rotary switches 3 phase control lights resistor-diode-combination The following tests can be carried out: 1. ON / OFF switch (State A / B) 2. simulation of non-gassing and gassing vehicles. Charging with and without
(State C / D) 3. fault indication of electric vehicle short circuit between CP and PE (State E) 4. simulation of an AC load 5. simulation of a three-phase load. Can be used to check the rotating field 6. charging plug for connection to a mode 3 charging point 7. control lamps for phase control (state A to E = vehicle states according to standard) …

Article number :3229