Only logged in customers who have purchased this product may leave a review.
SOLAR KIT 100 – 200 WP MONO – 55AH – 250VA
Solar kit for off grid site
– Solar panel 100Wp
– PWM controller 10A
– 250VA phoenix Victron Inverter
– 55 Ah battery GEL
– Cables and accessories
2X4mm² Solar Cable With MC4 (By The Metre)
Polycrystalline module 100Wp
Polycrystalline module 100Wp
Dimensions : 1175 x 540 x 35 mm
Weight : 8 kg
Peak power : 100W.
100 Wp model is a panel composed of 36 polycrystalline silicon cells with high yield.
Design techniques and meticulous production provide long-term high performance for every module produced.
Our rigorous quality control and testing facilities ensure that panels meet the criteria for the highest quality.
⦁ Normal operating temperature: 45 ° C
⦁ Wind Resistance: ? 130 km / h
⦁ Maximum diameter of the hailstone: 25 mm
⦁ Hailstone impact speed: 80 km / h
⦁ Lightweight anodized aluminum frame and reinforced
⦁ High transmission glass
⦁ Box “plug & play” with 3 LEDs
⦁ Safety glass 4mm thick
Solar regulator LS1024B PWM – 10A
Epsolar’s new generation programmable solar charge controller 10A. Adopt aluminum heat sink which enables the reliability in high temperature enviroments.
⦁ Capacity: 10A
⦁ Operating voltage: 12V or 24V
⦁ Temperature compensation
⦁ Warranty: 2 years
⦁ Technology: PWM
55 Ah GEL battery
Gel batteries are sealed batteries: no maintenance, no addition of distilled water. Strengthened compared to flooded batteries. Safety
A gel battery to withstand the discharge to 100% and its rated capacity when discharged holding time is short. This series has a longer discharge time compared to other batteries. The special plate design increases the life of the battery and especially in warmer temperatures. A separator in the battery improves performance. It also has a longer retention time.
⦁ rated voltage: 12V
⦁ capacity : 55Ah
⦁ Dimensions : L 229 x W 138 x H 209 mm
⦁ weight : 17 Kg
Inverter Victron Phoenix 250VA Pur sine 24V
Developed for professional duty, the Phoenix range of inverters is suitable for the widest range of applications.
The design criteria have been to produce a true sine wave inverter with optimized efficiency but without compromise in performance. Employing hybrid HF technology, the result is a top quality product with compact dimensions, light in weight and capable of supplying power, problem-free, to any load.
⦁ Pure Sine wave power inverter
⦁ Extra start-up power
⦁ To transfer the load to another AC source: the automatic transfer switch
⦁ Robust design and quality
⦁ Remote on/off switch
⦁ Peak power : 400W
⦁ – 5m of 2x4mm² solar cable
⦁ – Male and female MC4 connector crimped on cable
⦁ Provides optimal performance even in high temperatures and low light.
⦁ This kit will produce in Paris at least 200Wh in July and 40Wh in December.
⦁ The battery has a useful capacity of 144W/h (at 30% discharge to maximize the lifetime – 1200 cycles)